[1] Frank, B., "Using phase change materials (PCM) for space heating and cooling in buildings", Proceedings of AIRAH Performance Enhanced Buildings Environmentally Sustainable Design Conference, Australia, 2004.
[2] Pasupathy, A., Athanasius, L., Velraj, R., Seeniraj, R. V., "Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management", Applied Thermal Engineering, Vol. 28, No. 5-6, pp. 556-565, 2008, https://doi.org/10.1016/j.applthermaleng.2007.04.016.
[3] Chen, C., Guo, H., Liu, Y., Yue, H., Wang, C., "A new kind of phase change material (PCM) for energy-storing wallboard", Energy and Buildings, Vol. 40, No. 5, pp. 882-890, 2008, https://doi.org/10.1016/j.enbuild.2007.07.002.
[4] Huang, M.J., Eames, P.C.,
Hewitt, N.J., "
The application of a validated numerical model to predict the energy conservation potential of using phase change materials in the fabric of a building", Solar Energy Materials & Solar Cells, Vol. 90, No. 12, pp. 1951-1960, 2006, https://doi.org/10.1016/j.solmat.2006.02.002.
[5] Nagano, K., Takeda, S., Mochida, T., Shimakura, K., Nakdamura, T., "Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage – heat response in small scale experiment", Energy and Buildings, Vol. 36, No. 4, pp. 436-446, 2010, https://doi.org/10.1016/j.enbuild.2005.07.010.
[6] Farid, M.M., Chen, X.D., "Domestic electric space heating with heat storage", Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 213, No. 2, pp. 83-92, 1999, https://doi.org/10.1243/0957650991537455.
[7] Aryal, A., Chaiwiwatworakul, P., Chirarattananon, S., "An experimental study of thermal performance of the radiant ceiling cooling in office building in Thailand", Energy and Buildings, Vol. 283, p. 112849, 2023, https://doi.org/10.1016/j.enbuild.2023.112849.
[8] Nong, R., Zhang, L., Tang, X., Su, X., Tang, X., "Thermal performance study of PCM embedded radiant cooling ceiling assisted by infrared-transparent silicon wafers", Energy and Buildings, Vol. 321, pp. 114644, 2024.
[9] Shin, M.S., Kim, S.Y., Rhee, K.N., "Cooling capacity evaluation of ceiling radiant cooling panels using thermoelectric module", Energy and Buildings, Vol. 323, p. 114760, 2024, https://doi.org/10.1016/j.enbuild.2024.114760.
[10] Skovajsa, J., Drabek, P., Sehnalek, S., "Solution of the modular PCM-based cooling ceiling and ventilation system," Applied Thermal Engineering, Vol. 257, p. 124169, 2024, https://doi.org/10.1016/j.applthermaleng.2024.124169.
[11] Bogatu, D.I., Shinoda, J., Olesen, B.W., Kazanci, O.B., "Cooling performance evaluation of novel radiant ceiling panel containing phase change material (PCM)", Journal of Building Engineering, Vol. 103, p. 112051, 2025, https://doi.org/10.1016/j.jobe.2025.112051.
[12] Yang, S., Zhang, Y., Zhao, Y., Torres, J.F., Wang, X., "PCM-based ceiling panels for passive cooling in buildings: A CFD modelling", Energy and Buildings, Vol. 285, p. 112898, 2023, https://doi.org/10.1016/j.enbuild.2023.112898.
[13] Shi, W., Yang, H., Ma, X., Liu, X., "
Techno-economic evaluation and environmental benefit of hybrid evaporative cooling system in hot-humid regions",
Sustainable Cities and Society, Vol. 97, p. 104735, 2023, https://doi.org/10.1016/j.scs.2023.104735
[14] Soares, N., Costa, J.J., Gaspar, A.R., Santos, P., "Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency", Energy and Buildings, Vol. 59, pp. 82-103, 2013, https://doi.org/10.1016/j.enbuild.2012.12.042.
[15] Ho, C.J., Gao, Y.W., Yang, T.F., Rashidi, S., Yan, W.M., "
Numerical study on forced convection of water-based suspensions of nanoencapsulated PCM particles/Al₂O₃ nanoparticles in a mini-channel heat sink",
International Journal of Heat and Mass Transfer, Vol. 157, pp. 119965, 2020, https://doi.org/10.1016/j.ijheatmasstransfer.2020.119965.
[16] Daly, D., Roth, J., Kokogiannakis, G., McDowell, C., Tibbs, M., Cooper, P., "Energy consumption in Australian primary schools: Influences and metrics", Energy and Buildings, Vol. 277, p. 112549, 2022, https://doi.org/10.1016/j.enbuild.2022.112549.
[17] Sinacka, J., Szczechowiak, E., "
An experimental study of a thermally activated ceiling containing phase change material for different cooling load profiles", Energies, Vol. 14, p. 7363, 2021,
https://doi.org/10.3390/en14217363.
[18] Mirahmad, A., Sadreameli S.M., "Numerical study and simulation of the performance of a phase change material-filled heat exchanger for an air-conditioning system in a residential building located in hot and arid regions of Iran", Scientific Journal of Energy Engineering and Management, Vol. 5, No. 2, pp. 42-51, 2015.
[19] Center, F. S. E., Gu, L., "ASHRAE standard 140-2004 standard method of test for the evaluation of building energy analysis computer programs: Test results for the DOE-2.1E (v120) that is incorporated in energy gauge summit 3.14", 2007.
[20] Taheri, M.,
Pourfayaz, F.,
Habibi, R.,
Maleki, A., "
Exergy analysis of charge and discharge processes of thermal energy storage system with various phase change materials: A comprehensive comparison", Journal of Thermal Science, Vol. 33, No. 2, pp. 509-521, 2024, https://doi.org/10.1007/s11630-023-1859-y.
[21] Ahmad, N.A., Lim, C.W., "Simplified model and performance analysis for radiant cooling panel with serpentine tube arrangement and thin insulation layer for moisture control in tropical climate", Journal of Physics: Conference series, Conf. Ser. 1630, p. 012002, 2020, https://doi.org/10.1088/1742-6596/1630/1/012002.
[22] Sleiti, A.K.,
Naimaster, E.J., "
Energy consumption in office buildings with phase change materials", Eleven International Conference on Thermal Engineering: Theory and Applications, Doha, Qatar, February 25-28, 2018.
)