Exploring the Effect of Conservative Voltage Reduction on Optimal Operation Scheduling of Smart Distribution Grids Considering the Presence of Electric Vehicles

Authors

Abstract

To provide the required service quality to the consumers connected to the ending buses of radial distribution feeders, the voltage magnitude is set at higher values at the substation point and, hence, at the buses located within the beginning feeder sections. The active and reactive powers are in touch with voltage magnitude at the corresponding buses. Accordingly, the voltage increase stimulates increased active and reactive powers consumption at the beginning buses along with increased operation cost. To mitigate these issues and ameliorate the operation scheduling of the network, this article aims at developing a distribution management system based on conservative voltage reduction (CVR). In this process, a suitable voltage-dependent load model (referred to as the zip model) is deployed to tailor the effect of CVR consideration. The proposed model not only undertakes the active power charging/discharging processes of electric vehicles (EVs) interfacing inverters but also makes suitable decisions in regard to their reactive power schedules, simultaneously. A distributed Volt/VAr control mechanism is, then, developed along the distribution feeder to improve the voltage profile. Seemingly, the voltage magnitude is lessened at the beginning buses and, hence, the active and reactive powers are not increased in vain. Besides the economic metrics, technical enhancements are of significance, too. To this end, active power losses in distribution feeders are also underlined and the established model is extended to a multi-objective approach. The proposed model is evaluated on a low voltage distribution test system and the obtained results are discussed in depth.

Keywords


[1] Cagri, V., Sahin, D., Kocak, T., Ergut, S., Buccella, C., Cecati, C., Hancke, G. P., "A Survey on Smart Grid Potential Applications and Communication Requirementsi", IEEE Transactions on Industrial Informatics, Vol. 9, No. 1, pp. 28-42, 2013. [2] Farhangi, H. "A Road Map to Integration: Perspectives on Smart Grid Developmenti", IEEE Power & Energy Magazine, Vol.12, No.3, pp.52-66, 2014. [3] Rahimi, S., Marinelli, M., Silvestro, F., "Evaluation of Requirements for Volt/Var Control and Optimization Function in Distribution Management Systems", IEEE International Conference of Energy and Exhibition (ENERGYCON), pp. 331-336, 2012. [4] Zakariazadeh, A., Jadid, S., Siano, P., "Economic-Environmental Energy and Reserve Scheduling of Smart Distribution Systems: A Multiobjective Mathematical Programming Approach", Energy Conversion and Management, Vol. 78, pp. 151-164, Feb. 2014. [5] Mazidi, M., Monsef, H., Siano, P., "Incorporating Price-Responsive Customers in Day-Ahead Scheduling of Smart Distribution Networks", Energy Conversion and Management, Vol. 115, pp. 103 –116, 2016. [6] ANSI Standard. Electrical Power Systems and Equipment – Voltage Ratings: C 84.1-1995; 1995. [7] Preferred Voltage Levels for AC Systems, 0 to 50000 V, Standard: CAN3- C235-83(R2000), 2000. [8] Manbachi, M., Farhangi, H., Palizban, A., Arzanpour, S., "Maintenance Scheduling of Volt-VAR Control Assets in Smart Distribution Networks Using Advanced Metering Infrastructure", Canadian Journal of Electrical and Computer Engineering, Vol. 39, No. 1, pp. 26-33, 2016. [9] Feltrin, A. P., Quinjano, D. A., Mantovani, J. R. S., "Volt-VAR Multiobjective Optimization to Peak-Load Relief and Energy Efficiency in Distribution Networks,” IEEE Transactions on Power Delivery, Vol. 30, No. 2, pp. 618-626, 2015. [10] Antonio, P.F., Rodezno, D.Q., Mantovani, J.R.S., “Volt-VAR Multiobjective Optimization to Peak-Load Relief and Energy Efficiency in Distribution Networksi", IEEE Transactions on Power Delivery, Vol. 30, No. 2, pp. 618-626, 2011. [11] Borghetti, A., Napolitano, F., Nucci, C. A., "Volt/VAr Optimization of Unbalanced Distribution Feeders via Mixed Integer Linear Pprogramming", 18th Power Systems Computation Conference, pp. 1-7, 2014. [12] Manbachi, M., Nasri, M., Shahabi, B., Farhangi, H., A. Palizban, Arzanpour, S., Moallem, M., Lee, D. C., "Real-Time Adaptive VVO/CVR Topology using Multi-Agent System and IEC 61850-based Communication Protocol", IEEE Transactions on Sustainable Energy, Vol. 5, No.2, pp. 587-597, 2014. [13] Niazi, A. N., Sheikholeslami, A., Varaki, A. R. K., "Global Generation Maintenance Scheduling with Network Constraints, Spinning Reserve, Fuel, and Energy Purchase from Outside", IEEE Electrical Power and Energy Conference (EPEC), pp. 330–336, 2012. [14] Environmental Assessment of Plug-In Hybrid Electric Vehicles, Available Online: www.energy.gov. [15] Shao, S., Zhang, T., Ipattanasomporn, M., Rahman, S., "Impact of TOU Rates on Distribution Load Shapes in a Smart Grid with PHEV Penetration", IEEE Transmission and Distribution Conference and Exposition, pp. 1-6, 2010. [16] Weiller, C., "Plug-in Hybrid Electric Vehicle Impacts on Hourly Electricity Demand in the United States", Energy Policy, Vol. 39, No. 6, pp. 3766–78. 2011. [17] Xing, H., Fu, M., Lin, Z., Mou, Y., "Decentralized Optimal Scheduling for Charging and Discharging of Plug-in Electric Vehicles in Smart Grids", IEEE Transactions on Power Systems, Vol. 31, No. 5, pp. 4118-4127, 2016. [18] Clement, K., Haesen, H., Driesen, J., "Coordinated Charging of Multiple Plug-in Hybrid Electric Vehicles in Residential Distribution Grids", IEEE PES Power Systems Conference and Exposition, Seattle, 2009. [19] Gao, S., Chau, K. T., Chan, C. C., Wu, D., "Loss Analysis of Vehicle-to-Grid Operation", IEEE Vehicle Power and Propulsion Conference, pp. 1-6, 2010. [20] Zakariazadeh, A., Jadid, S., Siano, P., "Integrated Operation of Electric Vehicles and Renewable Generation in a Smart Distribution System", Energy Conversion and Management, Vol. 89, pp. 99-110, 2015. [21] Kisacikoglu, M.C., Ozpineci, B., Tolbert, L.M., "Effects of V2G Reactive Power Compensation on the Component Selection in an EV or PHEV Bidirectional Charger", IEEE Energy Conversion Congress and Exposition, pp. 870-876, 2010. [22] Fasugba, M. A., Krein, P.T., "Gaining Vehicle-to-Grid Benefits with Unidirectional Electric and Plug-in Hybrid Vehicle Chargers", IEEE Vehicle Power and Propulsion Conference (VPPC), 2011. [23] Marti, J. R., Ahmadi, H., Bashualdo, L., "Linear Power Flow Formulation based on a Voltage-Dependent Load Model", IEEE Transactions on Power Delivery, Vol. 28, No. 3, pp. 1682–1690, 2013. [24] Hamidi, A., Nazarpour, D., Golshannavaz, S., "Increasing the Renewables Share in Discos Power Provision: An Optimal Charging/Discharging Collaboration through EV Fleets", 21st Electric Power Distribution Conference (EPDC 21), 2016. [25] Bokhari, A., et al., "Experimental Determination of the ZIP Coefficients for Modern Residential, Commercial, and Industrial Loads", IEEE Transactions on Power Delivery, Vol. 29, No. 3, 2014. [26] Algarni, A. A. S., Bhattacharya, K., "Disco operation considering DG units and their goodness factors", IEEE Transactions on Power Systems, Vol. 24, No. 4, pp. 1831–1840, 2009. [27] Golshannavaz, S., Afsharnia, S., Aminifar, F., "Smart Distribution Grid: Optimal Day-Ahead Scheduling With Reconfigurable Topology", IEEE Transactions on Smart Grid, Vol. 5, No. 5, pp. 2402-2411, 2014.