Review on Analysis, Control, Implementation, and Assessment of Brushless DC Motor Drives

[1] Kusko, A., Peeran, S. M., "Definition of the Brushless Dc Motor", IEEE Industry Applications Conference (IAS), pp. 20-22, 1988. [2] Krishnan, R., "Permanent-Magnet Synchronous and Brushless DC Motor Drives", John-Willey Press, 2002. [3] حلوایی نیاسر، ابوالفضل، طراحی‌ و پیاده‌سازی درایو الکتریکی بدون‌حسگر موقعیت موتورBLDC با اینورتر کاهش‌ساختار یافته، رساله دکتری، دانشگاه علم و صنعت ایران، خرداد 1387. [4] Natarajan, S.P., Chellamuthu, C., Karki, B., Kumar, C.A., "Simulation and Performance Evaluation of Permanent Magnet Brushless DC Motor Using Saber Package", Workshop on Computers in Power Electronics (COMPEL), pp. 235–2420, 2000. [5] Lee, B.K., Ehsani, M., "A Simplified Functional Model for 3-Phase Voltage-Source Inverter Using Switching Function Concept", IEEE Industrial Electronics Conf., pp. 462-467, 1999. [6] Bonvin, F., Perriard, Y., "BLDC Motor Control in Multiple Dq Axes", IEE Power Electronics and Variable Speed Drives Conf., pp. 500-505, 2000. [7] Chapman, P.L., Sudhoff, S.D., Whitcomb, C.A., "Multiple Reference Frame Analysis of Non-Sinusoidal Brushless DC Drives", IEEE Trans. on Energy Conversion, Vol. 14, No. 3, pp. 440 – 446, Sept. 1999. [8] Halvaei Niasar, A., Moghbelli, H., Vahedi, A., "Modeling and Simulation Methods for Brushless DC Motor Drives", International Conf. on Modeling, Simulation and Applied Optimization (ICMSAO), pp.05-38/05-176, 2005. [9] Krishnan, R., Lee, Sh., "PM Brushless DC Motor Drive with a New Power-converter Topology", IEEE Trans. on Industry Applications, Vol. 33, No. 4, pp. 973-982, July/August 1997. [10] Gopalarathnam, T., Toliyat, H. A., "A New Topology for Unipolar Brushless Dc Motor Drive with High Power Factor", IEEE Trans. on Power Electronics, Vol. 18, No. 6, pp. 1397-1404, Nov. 2003. [11] Lee, B.S., Krishnan, R., "A Variable Voltage Converter Topology for Permanent-Magnet Brushless Dc Motor Drives Using Buck-Boost", IEEE International Symposium on Industrial Electronics (ISIE), pp.689-694, 1999 [12] Lee, B.K., Kim, T.H., Ehsani, M., "On The Feasibility Of Four-Switch Three-Phase BLDC Motor Drives for Low Cost Commercial Applications: Topology and Control", IEEE Trans. on Power Electronics, Vol. 18, No. 1, pp. 164-172, January 2003. [13] Carlson, R., Mazenc, M.L., Dos, J.C., "Analysis of Torque Ripple Due to Phase Commutation in Brushless DC Machines", IEEE Trans. on Industry Applications, Vol. 28, No. 3, pp. 632-638, May/June 1992. [14] ABB Technical Note: Motor Control with DTC, TD1 EN Rev. B, 2007 [15] http://www.abb.com/product/ap/seitp322/dc47706b5b2eabd4c125748a003ac770.aspx [16] Ozturk, S.B., Toliyat, H.A., "Direct Torque and Indirect Flux Control of Brushless DC Motor", IEEE/ASME Trans. on Mechatronics, Vol. 16, No. 2, pp. 351-360, 2011. [17] Ho, T.Y., Chen, M.S., Lin, J.S., Chen, P.H., "The Design and Implementation of the BLDC Motor Drive for a Washing Machine", IEEE Global Conf. on Consumer Electronics (GCCE), pp. 156-157, 2012. [18] Feyzi, M.R., Shafiei, M., Bahrami Kouhshahi, M., "Position Sensorless Direct Torque Control of Brushless DC Motor Drives Based on Sliding Mode Observer Using NSGA-II Algorithm Optimization", 2nd IEEE Power Electronics, Drive Systems and Technologies Conf. (PEDSTC), pp. 151-156, 2011. [19] Arab Markadeh, G.R., Mousavi, S.I., Abazari, S., Kargar, A., "Position Sensorless Direct Torque Control of BLDC Motor", IEEE International Conf. on Industrial Technology, pp. 1-6, 2008. [20] Heidari, R., Markadeh, G A., Abazari, S., "Direct Torque and Indirect Flux Control of Brushless DC Motor with Non-Sinusoidal Back-EMF without Position Sensor", 19th Iranian Conf. on Electrical Engineering (ICEE), pp. 1-5, 2011. [21] Vas, P., "Sensorless Vector and Direct Torque Control", Oxford University Press, 1998. [22] Kai-Sheng Kan, K., Ying-Yu Tzou, T., "Adaptive Soft Starting Method with Current Limit Strategy for Sensorless BLDC Motors", IEEE International Symposium on Industrial Electronics (ISIE), pp. 605-610, 2012. [23] Grenier, D., Dessaint, L.A., "A Park-like Transformation for the Study and the Control of a Non-Sinusoidal Brushless DC Motor", IEEE Industrial Electronics, Control, and Instrumentation (IECON), pp. 837-843, 1995. [24] Lei, H., Toliyat, H.A., "BLDC Motor Full Speed Range Operation Including the Flux-Weakening Region", IEEE Industry Applications Conf., Vol. 1, pp. 618-624, 2003. [25] Acarnley, P.P., Watson, J.F., "Review of Position-Sensorless Operation of Brushless Permanent-Magnet Machines", IEEE Trans. on Industrial Electronics, Vol. 53, No. 2, pp. 352-362, April 2006. [26] MC33035, NCV33035 Brushless DC Motor Controller, Semiconductor Components Industries, Publication order number: MC33035/D, April 2004, Rev. 7. http://onsemi.com . [27] Kim, T., Lee, H.W., Ehsani, M., "Position Sensorless Brushless DC Motor/Generator Drives: Review and Future Trends", IET Electric Power Applications, Vol. 4, No. 2, pp. 557-564, April 2007. [28] Shao, J., Nolan, D., Hopkins, T., "A Novel Direct Back EMF Detection for Sensorless Brushless DC (BLDC) Motor Drives", IEEE Applied Power Electronics Conference and Exposition (APEC), Vol. 1, pp. 33 –37, 2002. [29] Grainger, S., Allan, M., Westwood, T., Champaneri, R., "Sensorless Control of a Trapezoidal Brushless DC Motor Using the TMS320C25 DSP", Texas Instruments Report: SPRA323, ESIEE, Paris, September 1996. [30] Park, J.Y., Lieu, D.K., "Position Detection of Brushless DC Motor Using Inductance Bridge System", IEEE Trans. on Magnetics, Vol. 39, No. 5, pp. 3310-3312, September 2003. [31] Terzic, B., Jadric, M., "Design and Implementation of the Extended Kalman Filter for the Speed and Rotor Position Estimation of Brushless DC Motor", IEEE Trans. on Industrial Electronics, Vol. 48, No. 6, pp. 1065 –1073, Dec. 2001. [32] Park, B.G., Kim, T.S., Ryu, J.S., Hyun, D.S., "Fuzzy Back-EMF Observer for Improving Performance of Sensorless Brushless DC Motor Drive", Proceedings of the IEEE Applied Power Electronics Conf. and Exposition (APEC), 2006. [33] Halvaei Niasar, A., Vahedi, A., Moghbelli, H., "Sensorless Control of Four-Switch, Brushless DC Motor Drive without Phase Shifter", IEEE Trans. on Power Electronics, Vol. 23, No. 6, pp. 3079-3087, November 2008. [34] Chen, C.H., Cheng, M.Y., "A New Cost Effective Sensorless Commutation Method for Brushless DC Motors Without Phase Shift Circuit and Neutral Voltage", IEEE Trans. on Power Electronics, Vol. 22, No. 2, pp. 644-653, March 2007. [35] Shen, J.X., Zhu, Z.Q., Howe, D., "Practical Issues in Sensorless Control of PM Brushless Machines Using Third-Harmonic Back-EMF", Proceedings of the IEEE International Power Electronics and Motion Control Conference (IPEMC), Vol. 2, pp. 1-5, 2006. [36] Ogasawara, S., Akagi, H., "An Approach to Position Sensorless Drive for Brushless DC Motors", IEEE Trans. on Industry Applications, Vol. 27, No. 5, pp. 928 –933, 2001. [37] Becerra, R.C., Jahns, T.M., Ehsani, M., "Four-Quadrant Sensorless Brushless ECM Drive", IEEE Applied Power Electronics Conference (APEC), pp. 202-209, 1991. [38] Kim, T.H., Ehsani, M,., "Sensorless Control of the BLDC Motors from Near-Zero to High Speeds", IEEE Trans. on Power Electronics, Vol. 19, No. 6, pp. 1635-1645, November 2004. [39] Shao, J., "An Improved Microcontroller-based Sensorless Brushless DC (BLDC) Motor Drive for Automotive Applications", IEEE Industry Applications Society Conf. (IAS), Vol. 4, pp. 2512-2517, 2005. [40] Doo-Hee, J., In-Joong, H., "Low-Cost Sensorless Control of Brushless DC Motors Using a Frequency-independent Phase Shifter", IEEE Trans. on Power Electronics, Vol. 15, No. 4, pp. 744 –752, July 2000. [41] Zhang, L., Xiao, W., Qu, W., "Sensorless Control of BLDC Motors Using an Improved Low-Cost Back EMF Detection Method", IEEE Power Electronics Specialists Conference (PESC), pp. 1828-1834, 2006. [42] Parasiliti, F., Petrella, R., Tursini, M., "Initial Rotor Position Estimation Method for PM Motors", IEEE Industry Applications Society Conference (IAS), Vol. 2, pp. 1190 –1197, 2000. [43] Ludovic, S., Sámi, S., "Brushless DC Motor Control Without Mechanical Sensors", IEEE Power Electronics Specialists Conf. (PESC), pp. 375-381, 1996. [44] Ho, S.L., Fei, M.R., Cheng, K.W.E., Wong, H.C., "An Auto-Tuning Algorithm for the IRBF Network of Brushless DC Motor", IEEE Trans. on Magnetics, Vol. 40, No. 2, pp. 1168-1171, March 2004. [45] Jang, G.H., Park, J.H., Chang, J.H., "Position Detection and Start-up Algorithm of a Rotor in a Sensorless BLDC Motor Utilizing Inductance Variation", IEE Proceedings of Electric Power Applications, Vol. 149, No.2, pp. 137-142, 2002. [46] Krishnan, R., Ghosh, R., "Starting algorithm and Performance of a PM DC Brushless Motor Drive System with no Position Sensor", IEEE Power Electronics Specialists Conference (PESC), pp. 815-821, 1989. [47] Jahns, T.M., Soong, W.L., "Pulsating Torque Minimization Techniques for Permanent Magnet AC Motor Drives---A Review", IEEE Trans. on Industrial Electronics, Vol. 43, No. 2, pp. 321-330, April 1996. [48] Gieras, J.F., Wing, M., "Permanent Magnet Motor Technology: Design and Applications"; Marcel Dekker Inc., 2002. [49] Yong, L., Zhu, Z.Q., Howe, D., "Commutation-Torque-Ripple Minimization in Direct-Torque-Controlled PM Brushless DC Drives", IEEE Trans. on Industry Applications Vol. 43, Issue: 4, pp. 1012-1021, 2007. [50] Kim, T.S., Ahn, S.C., Hyun, D.S., "A New Current Control Algorithm for Torque Ripple Reduction of BLDC Motors", Proceedings of the IEEE Industrial Electronics Society (IECON), pp.1521-1526, 2001. [51] Halvaei Niasar, A., Moghbelli, H., Vahedi, A., "Commutation Torque Ripple of Four-Switch Brushless DC Motor Drives_Part I: Analysis", IEEE International Workshop on Advanced Motion Control (AMC), pp. 541-546, 2006. [52] Song, J.H., Choy, I., "Commutation Torque Ripple Reduction in Brushless DC Motor Drives Using a Single DC Current Sensor", IEEE Trans. on Power Electronics, Vol. 19, No. 2, March 2004, pp. 312-319. [53] Miller, J.M., "Power Electronics in Hybrid Electric Vehicle Applications", IEEE Applied Power Electronics Conference and Exposition, APEC '03, pp. 23-29, 2003. [54] Park, S.I., Kim, T.S., Ahn, S.C., Hyun, D.S., "An Improved Current Control Method for Torque Improvement of High-Speed BLDC Motor", IEEE Applied Power Electronics Conference and Exposition, Vol. 1, pp. 294-299, 2003. [55] Zhu, Z.Q., Shen, J.X., Howe, D., "Flux-Weakening Characteristics of Trapezoidal Back-EMF Machines in Brushless DC and AC Modes", IEEE International Power Electronics and Motion Control Conf. (IPEMC), Vol. 2, pp.1-5, 2006. [56] Safi, S.K. Acarnley, P.P., Jack, A.G., "Analysis and Simulation of the High-Speed Torque Performance of Brushless DC Motor Drives", IEE Proceedings of Electric Power Applications, Vol. 142, pp. 191 –200, May 1995. [57] Wu, H.X., Cheng, S.K., Cui, S.M., "A Controller of Brushless DC Motor for Electric Vehicle", IEEE Trans. on Magnetics, Vol. 41, No. 1, pp. 519-513, January 2005. [58] Gu, B.G., Park, J.S., Choi, J.H., Rhyu, S.H., Jung, I.S., “Optimal Lead Angle Calculation for Brushless DC Motor”, IEEE International Power Electronics Conf., pp. 1416-1420, 2010. [59] Texas Instruments, "Implementation of a Speed Controlled Brushless DC Drive Using TMS320F240", Literature Number: BPRA064, 1997. [60] Texas Instruments, "Implementation of a Sensorless Speed Controlled Brushless DC drive using TMS320F240", Literature Number: BPRA072, 1997. [61] Microchip, "Brushless DC Motor Fundamentals", Application Notes AN885, AN901, AN1160. [62] Motorola Semiconductor, "Sensorless Brushless dc Motor Using the MC68HC908MR32 Embedded Motion Control Development System", Application Note AN1858, 2000. [63] Freescale Semiconductor, "3-Phase BLDC Motor Control with Sensorless Back EMF Zero Crossing Detection Using 56F80x", AN1914, Rev. 1, 11/2005. [64] RENESAS, "H8/300H Brushless DC Motor Control Reference Platform", Application Note 139/1.0, September 2003. [65] Halvaei Niasar, A., Vahedi, A., Moghbelli, H., "Design and Implementation of Sensorless Control for Four-Switch, Three-Phase Brushless DC Motor Drive based on DSP Technology", Iranian Journal of Electrical and Computer Engineering (IJECE), , Vol. 8, No. 1, pp. 1-8, Winter 2009.