Volume 9, Issue 2 (7-2019)                   JEM 2019, 9(2): 48-63 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Sedaghati F. A Bidirectional DC-DC Convreter with Zero Voltage Switching Capability for Energy Storage Application. JEM. 2019; 9 (2) :48-63
URL: http://energy.kashanu.ac.ir/article-1-829-en.html
University of Mohaghegh Ardabili
Extended Abstract:   (2000 Views)
In this paper, a bidirectional DC-DC converter with high power density for energy storage application is proposed. The presented converter provides the possibility of power transfer in both directions only through adjusting phase shift angle. Zero voltage switching (ZVS) in both turn-on and turn-off moments of all switches is the major capability of the converter that makes it suitable for high power applications. ZVS of the converter is provided without any auxiliary devices. High frequency transformers are employed in the converter construction to match the converter’s two-side voltage. Moreover, transformer’s leakage inductance along with external auxiliary inductance acts as energy storage in a power transfer from one side of the converter to the other side. Operation principle of the converter in the steady state is analyzed, and, then, its dynamic model is derived. ZVS criteria of the proposed converter are studied, and finally the experimental measurement results of laboratory-scale prototype are presented.
Full-Text [PDF 627 kb]   (1770 Downloads)    
Type of Study: Research | Subject: Electrical Engineering
Received: 2017/01/10 | Revised: 2019/10/26 | Accepted: 2018/10/21 | Published: 2019/06/3

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 CC BY-NC 4.0 | Energy Engineering & Management

Designed & Developed by : Yektaweb