Volume 5, Issue 4 (3-2016)                   JEM 2016, 5(4): 50-61 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Simulation and Analysis of Wind Turbine Configurations in Wind Farm by Using CFD. JEM. 2016; 5 (4) :50-61
URL: http://energy.kashanu.ac.ir/article-1-471-en.html
Abstract:   (2573 Views)

In this paper, configuration of ‘Vestas_V47’ wind turbines in a wind farm is investigated using computational fluid dynamics (CFD). First the geometry of wind turbine has been modeled, then unstructured mesh around the blades, nacelle and tower have been generated and finally the SST k-ω model has been used for modeling the turbulence. Afterward wind’s velocity contour for a wind farm with two turbines extracted and characteristics of downstream wake has been calculated with different distances between turbines. Velocity profiles have been extracted by assuming distances 5D and 7.5 D between two turbines. As a result, maximum reduction in velocity has been occurred at nacelle height and in 8D and 12D respectively. According to the calculation and comparison maximum efficiency of wind farm when d=5D and v=12.5 m/s is 79.029% and with d=7.5 D and v=15m/s is 78.525%.

Full-Text [PDF 1437 kb]   (1574 Downloads)    
Type of Study: Research | Subject: Mechanical Engineering
Received: 2015/05/22 | Revised: 2016/03/16 | Accepted: 2016/02/2 | Published: 2016/02/18

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
  This work is licensed under a This work is licensed under a Creative Common International License..

© 2022 CC BY-NC 4.0 | Energy Engineering & Management

Designed & Developed by : Yektaweb